R Commander Installation Notes

The Rcmdr package is a standard R package, and it installs and is loaded in the normal manner. There are, however, a few installation issues, particularly on Macintosh systems, and these are described in this document.

For more detailed basic installation instructions, see Ch. 2 of my book Using the R Commander.

A general point is keep in mind is that the Rcmdr package uses a number of other "contributed" packages (in addition to packages, such as tcltk and MASS, that are part of the standard R distribution), and these must be present for it to work properly. Many of these packages have their own dependencies, which depend on still other packages, etc. These additional packages will either be installed along with the Rcmdr package or the Rcmdr will offer to install them when it first starts up (and you should accept the offer).

General Installation Procedure

The following instructions may be all you need to get started; for more detailed instructions and potential installation issues, see the various sections below. These instructions assume that you have an active Internet connection.

  1. Download R from CRAN and install it in the manner appropriate to your operating system. If you have an old version of R -- that is, older than the current version -- then it's generally a good idea to install the current version of R before installing the Rcmdr package. On Windows, opt for a customized startup and select the single-document interface ("SDI," see the Windows notes below for details).
  2. On Mac OS X only, download and install XQuartz, and reboot your computer (see the Mac notes below for greater detail).
  3. Start R, and at the > command prompt, type the command install.packages("Rcmdr")
  4. Once it is installed, to load the Rcmdr package, just enter the command library(Rcmdr)

General Installation Issues

Ocassionally, an R package or packages required by the Rcmdr package fails to be installed and the R Commander can't start. When this happens, there is typically an informative error message about the missing package(s). There are two common causes for this problem: (1) The package(s) in question may be temporarily missing from the CRAN mirror that you used; or (2) the package(s) may be permanently unavailable for an older version of R.

In the first instance, you can install (each) missing package directly via the command install.packages("package-name"), or, for more than one missing package, install.packages(c("package-1-name", "package-2-name", etc)) , selecting a different CRAN mirror from the one you used initially. In the second instance, you can install the current version of R (always a good idea), and start again.

If you wish to start the R Commander automatically when R starts up, you can add a plain-text ("ascii") file named .Rprofile to your home directory, with the following contents:

old <- getOption("defaultPackages")
options(defaultPackages = c(old, "Rcmdr"))

To determine your home directory, type the command getwd() ("get working directory") at the > command prompt in a fresh R session. Be sure to use a plain-text editor to create this file, not a word processor like Word, or, if using a word processor, to save the file as a plain-text file.

Notes for specific platforms

If the general installation procedure and installation issues above are insufficient, here is specific information for Windows, Linux, and Mac OS X systems:

Windows Installation

The easiest way to install the Rcmdr package is via the Rgui Packages -> Install packages menu or via the command install.packages("Rcmdr") entered at the R > command prompt. R will ask you to select a CRAN mirror; pick the first, "0-Cloud" mirror, or a mirror site near you.

When you first load the Rcmdr package with the command library("Rcmdr"), it will offer to download and install missing dependencies; allow it to do so. If you installed R in Program Files, you may prefer to run R with adminstrator privileges to install packages: Right click the R icon and select "Run as administrator." Otherwise, packages will be installed in a package library particular to your user account rather than the main R package library; that should work OK too. I suggest that you install R into a different directory, such as C:\R\, to avoid this issue.

On Windows, the Rcmdr package works best with the "single-document "R interface (SDI). Under the default "multiple-document interface" (MDI), R Commander dialog boxes may not stay on top of the main R window. In the Startup options screen of the R installer, select Yes (customized startup). Then select the SDI (single-document interface) in preference to the default MDI (multiple-document interface); feel free to make other changes, but you may take all the remaining defaults.

If you install R with the standard MDI, to enable the SDI you can make a copy of the R desktop icon (right-click on the icon, drag it to a different location on the desktop, select Copy Here from the context menu). Right-click the new icon and select Properties. Add --sdi (preceded by a space) to the Target field on the Shortcut tab of the Properties dialog box. The field should read something like "C:\Program Files\R\R-x.y.z\bin\Rgui.exe" --sdi, where x.y.z specifies the version of R you installed. If you wish, change the name of the icon on the General tab (e.g., to R x.y.z SDI). Click OK. Alternatively, you canyou can edit the Rconsole file in R's etc subdirectory to select the SDI.

Linux/Unix Installation

Linux/Unix systems typically have all of the software required for building packages already installed. The easiest way to install the Rcmdr package is to run R as root and issue the command install.packages("Rcmdr") at the R prompt.  R will ask you to select a CRAN mirror; pick the first, "0-Cloud" mirror, or a mirror site near you.

On Ubutu systems, in particular, the following procedure should work (slightly modified from a suggestion by Ista Zahn):

  1.  Add the R repository to Ubuntu (see http://cran.r-project.org/bin/linux/ubuntu/).
  2.  Install base R and the R dev package: sudo apt-get install r-base r-base-dev
  3. Start R from the Ubuntu command line as root so you can install packages system-wide: sudo R
  4. From the R command prompt, install Rcmdr:  install.packages("Rcmdr"). R will ask you to select a CRAN mirror; pick the first, "0-Cloud" mirror, or a mirror site near you.

It is also possible to install R and R packages from the Ubuntu package respository but these are almost always out of date.

When you first load the Rcmdr package with the command library(Rcmdr), it will offer to download and install missing dependencies; allow it to do so.

Mac OS X Installation

These instructions are for R version 3.2.1 or later; if you're using an earlier version of R, I suggest that you upgrade (in fact, it's generally a good idea to upgrade to the current version of R), or, failing that, consult the special Mac OS X installation notes for the R Commander under older versions of R. R 3.2.2 or higher only supports Mac OS X version 10.9 (Mavericks) or higher. R 3.2.1 supports Mac OS X version 10.6 (Snow Leopard) or higher. Please read these instructions carefully, as they are a little complicated.


R will ask you to select a CRAN mirror; pick the first, "0-Cloud" mirror, or a mirror site near you.

Mac OS X Trouble-shooting

Occasionally, the Rcmdr package will fail to load properly in Mac OS X. When this problem occurs, the cause is almost always the failure of the tcltk package to load --The Rcmdr package depends on the tcltk package. You can confirm this diagnosis by trying to load the tcltk package directly, in a fresh R session, issuing the command library(tcltk)at the R command prompt.

You can verify the source of this problem by issuing the following command at the R command prompt:

system("ls -ld /usr/local /usr/local/lib /usr/local/lib/libtcl*")

If there is a file-permissions problem, you should see something like

ls: /usr/local/lib: Permission denied
ls: /usr/local/lib/libtcl*: Permission denied
drwx------  8 root  wheel  272 Sep 24 10:21 /usr/local

Having confirmed the problem, you can change the file permissions in /usr/local by opening a terminal window on your Mac (Terminal.app is in the Applications Utilities folder), and entering the following command at the $ prompt in the terminal window:

The operating system will ask you to supply your password to execute this command.

If you are using Mac OS X 10.9 ("Mavericks") or later and the R Commander becomes slow or unresponsive, you can run R and the R Commander in a terminal window on your Mac rather than from R.app or prevent your computer from "napping" while R.app is running.. See the installation notes above.

Installing Optional Pandoc and LaTeX Software

Installing R and the Rcmdr package is sufficient for creating HTML (web page) reports via the R Markdown document that the R Commander builds for each session, but if you prefer to create editable Word or Open Office documents or PDF files for reports, you will have additionally to install Pandoc and LaTeX (the latter, in conjunction with Pandoc, for PDF reports). The most convenient way to do this is via the R Commander Tools > Install auxiliary software menu (which appears only if Pandoc or LaTeX is absent).

Last modified: 2016-12-23 by John Fox <jfox AT mcmaster.ca>.